ARTICLES

Foreign Material Extractors for Peanut Flowpipes

Authors: P. D. Blankenship , J. I. Davidson , T. H. Sanders , R. C. Layton , J. W. Willis

  • Foreign Material Extractors for Peanut Flowpipes

    ARTICLES

    Foreign Material Extractors for Peanut Flowpipes

    Authors: , , , ,

Abstract

Foreign material extractors were installed and evaluated in farmers stock peanut flowpipes during the harvest seasons of 1978, 1979, and 1980. Three of the extractors evaluated were commercially available and consisted of a stationary, inclined screen manufactured by Suffolk Iron Works, Inc., Suffolk, VA; an inclined, mechanical tumbler-extractor manufactured by Hobbs-Adams Engineering Company, Suffolk, VA; and an inclined, mechanical roller screen manufactured by Bev. Mathison's Spring Works, Warwick, Queensland, Australia. Two additional experimental extractors including a stationary, inclined screen and an aspirator were also tested along with aspiration hoods used in conjunction with the commercial extractors. The weight per tonne (t) of peanuts of foreign materials removed by the various extractors ranged from 0.8 kg to 21.3 kg. Aspiration generally doubled the amount of foreign materials removed by the extractors. The primary materials removed by the extractors were dirt, peanut stems, sticks, leaves, small rocks, and some broken or loose shelled peanut meats.

Full Article Available as PDF only - Use Download Feature

Keywords: Foreign materials, extractor, peanuts, Cleaning, separation, Storage

How to Cite:

Blankenship, P. & Davidson, J. & Sanders, T. & Layton, R. & Willis, J., (1984) “Foreign Material Extractors for Peanut Flowpipes”, Peanut Science 11(1), p.10-12. doi: https://doi.org/10.3146/i0095-3679-11-1-4

13 Views

2 Downloads

Published on
01 Jan 1984
Peer Reviewed

Author Notes

Mention of a trademark of proprietary product does not constitute a guarantee or warranty of the product by ARS and does not imply its approval to the exclusion of other products that may also be available.